This command installs or updates the FAT32 installable file system version 5.00.00

New releases are available from the Arca Noae website. FAT32 is a part of the OS/2 & eCS drivers and software package.

If a previous version of FAT32 is installed, it must be uninstalled before installing this version. The uninstall is not kind to config.sys. Back up your config.sys before uninstalling FAT32, and restore it afterward. Installing this driver will make the appropriate changes to the config.sys that you saved before installing the previous version.

The files for the FAT32 file system 5.00.00 are not supplied on the Suntan Special CD-ROM. You must supply this item: FAT32-5_0_0.exe

Installation Directory: FindBootDrive() || ':\OS2'
trac.netlabs.org

This command updates the USB driver stack version 12.03. USB drivers must have been previously installed and configured. This installation script does not install COM or AUDIO by default.

New releases are available from the Arca Noae website. USB is a part of the OS/2 & eCS drivers and software package.

The files for the USB driver stack version 12.03 are not supplied on the Suntan Special CD-ROM. You must supply this item: USB-12.03.exe

Installation Directory: FindBootDrive() || ':\OS2\BOOT'
trac.netlabs.org

This command sets the computer to NOT archive the desktop at system boot. There is a companion command, archiveON, that sets the computer to archive the desktop a system boot.

Installation Directory:

This command sets the computer to archive the desktop at system boot. There is a companion command, archiveOff, that sets the computer to NOT archive the desktop a system boot.

Installation Directory:

This command installs Archive Viewer, written by Alex Taylor. Archive Viewer is a very simple GUI tool for viewing and extracting archive files of various types. It originated as a system utility included in eComStation (and it remains so to this day). However, the product is also released as open source software under the GNU GPL.

Installation is unattended by WarpIN.

A reboot is needed after installation unless ArcView was previously installed.

Installation Directory: osDir || '\bin'
www.altsan.org

This command opens the Installed Features folder to facilitate the removal of the Automatic Registration Tool (ART) also known as the "Dancing Elephant".

Procedure
In the Installed Features folder, open Install Object - Inventory.
Check the ART - Inventory object checkbox.
Press Uninstall.
Confirm the uninstallation.
When uninstallation is complete, Install Object - Inventory
and the Installed Features folder.
Press OK when done.

Installation Directory:

This command creates an automatic LAN login object in the startup folder. After creating the object, the designated user will be logged in each time the system is started.

The login window will be preloaded with the user specified in the settings 'username', 'password' and 'domain'

Installation Directory:

This command installs cdrtools2 2.01.01a04, a suite of command line programs for manipulating CD and DVD media. An ASPI router driver is installed, and Config.Sys is modified. If OS2AHCI.ADD is installed, the SCSI option /S is enabled.

Installation Directory: appsDir || '\cdrtools2'

This command cleans the Suntan Special settings, adding any missing settings, and removing any extra settings.

The install is unattended.

Installation Directory:

Deletes all fixpak archives and log files. This eliminates the possibility to revert fixpaks, but it saves space.

Installation Directory:

This command installs cputemp, a temperature monitoring application which includes an eCenter widget. Thanks to Vasilkin Andrey for creating cputemp. cputemp requires XWorkPlace or equivalent.

A reboot is needed to load a device drver. Config.sys is updated.

Installation Directory:

This command installs Daniela Engert's ATAPI driver, version 0.4.0. The command recognizes that the driver is sometimes installed as DANIATAP.FLT but installs as DaniATAPI.FLT. The command removes IBMATAPI.FLT, IBMIDECD.FLT and RSJIDECD.FLT from the Config.Sys file.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

Installation Directory: FindBootDrive() || ':\os2\boot'
hobbes.nmsu.edu

This command installs Daniela Engert's DASD driver. (DaniDASD.DMD) This driver is only applicable to Warp 4. This driver should not be used with a system that uses LVM.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

Installation Directory: FindBootDrive() || ':\os2\boot'
hobbes.nmsu.edu

This command installs Daniela Engert's EIDE driver. (DaniS506.ADD) DaniS506 is now maintained by Steven Levine

Version 1.8.15

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes. Reference to IBMS506.ADD in config.sys is changed to DaniS506.ADD. Reference to PCMSSDIF.SYS is removed.

Installation Directory: FindBootDrive() || ':\os2\boot'
svn.netlabs.org

This command cleans up after weird install problems caused by some app installs. Each case is tested, and action is taken only if a problem is detected.

This install is unattended.

Installation Directory:

This command installs the July 19, 2005 update to the DMD drivers, IBM OS2DASD.DMD (version 14.104) and OS2CDROM.DMD (version 10.157)

The update in this package includes a very important update to OS2DASD.DMD that appears to resolve various traps that occur when processing removeable media. This install is unattended.

Installation Directory: FindBootDrive() || ':\os2\boot'

This command installs DVDDAO 2.0.6, a program for ripping and burning DVD. DVDDAO was written by nickk. You must have a file system capable of supporting large files to work with DVD iso images. (Probably that means you need a JFS drive with at least 4.7 GB free)

A command file is provided as examples of how to rip (leach.cmd) Two command files (burniso.cmd and burnfolder.cmd) are provided to burn DVD.

Installation Directory: appsDir || '\dvddao'
hobbes.nmsu.edu

This command installs eCups. The installation is unattended.

The eCups control panel is added to the Setup Folder. This is a URL object that will open in the default browser. The eCups help file is placed in the Information folder.

Installation Directory: FindBootDrive() || ':\'
trac.netlabs.org

This command installs the emx runtime. An icon for the emx documentation is created.

The command makes changes to config.sys to support emx.

The install is unattended. A reboot is required after the installation is complete.

Installation Directory: appsDir || '\emx'

This command guides the user to configure ePDF for first time use.

Installation Directory:

This command installs feature install, the OS/2 installer needed for the installation of TCP/IP 4.3, Java and other programs.

Procedure
The install will put up a dialog to warn that the workplace
shell is to be restarted. Press OK.
When the workplace shell restarts, installation is complete.

Installation Directory:

This command installs the Innotek Font Engine, release 1 The installation is unattended.

Installation Directory: appsDir || '\FontEngine'

This command installs FPos, a WPS cleaning utility written by Rich Walsh. In addition to creating a program icon, the FPos program will be started. The user will be prompted to delete all Folder Position entries in the OS/2 ini file, which can cure the problem of icon drift.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\fpos'

This command installs IBM's final free IDEDASD package. It detects LVM systems and installs the appropriate version of the driver.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

Installation Directory: FindBootDrive() || ':\os2\boot'

This command installs GCC 4 runtime libraries needed for all Qt 4 installations. On OS/2 the libraries are installed to OS2\DLL, while on eCS, the libraries are installed to eCS\DLL. On ArcaOS, the installation is skipped, as the libraries are installed and maintained by RPM/YUM.

The installation is unattended.

Installation Directory: osdir || '\dll'

This command installs the TCP/IP hosts file from the location specified by the setting 'hostsFile'. If hostsFile is blank, the user is prompted for a hosts file.

Installation Directory:

This command installs a newer HPLIP to an existing eCups installation. The installation is unattended.

Installation Directory: FindBootDrive() || ':\'
www.os2world.com

This command copies the Inetver output to the log

Installation Directory:

This command installs the Innotek Runtime, 1.12 The installation is unattended.

Installation Directory: appsDir || '\innort'

This command applies the IBM Peer for OS/2 Warp 4 FixPak 8414. This FixPak applies to Warp 4.

FixPak 8414 is applied using an unattended install method. A reboot is required after applying the FixPak.

Installation Directory:

This command configures Java 1.1 to use the Microsoft Web Fonts. The font properties are modified. A backup file is created in the \java11\lib directory named font.original.prp.

Installation Directory:

This command configures the Java plugin for Netscape, Mozilla, PmW-Fx and Firefox. The user selects the Java to be used for each browser.

Installation Directory:

This command installs the IBM Java Development Kit version 1.1.8. The installation is unattended, and a reboot is needed after the installation is complete.

Installation Directory: FindBootDrive() || ':'

This command installs InnoTek OS/2 Kit for Java, JRE version. Due to the Innotek license, you must download this product yourself. Suntan Special will install and configure the product once you have downloaded it. The JavaPlug command can be used to set up Java in each browser.

The setting java2Home sets the Java 2 home directory.

Installation Directory: appsDir || '\java142'

This command patches the Java JDK 1.1.8. The version of Java before and after the installation is displayed.

Procedure
Before the JDK 1.1.8 can be patched, all java programs must be stopped.
examples: dhcpscps.cmd, ddnsaps.cmd, binlscps.cmd
Press OK when done.

Installation Directory: FindBootDrive() || ':\'

This command installs Innotek LibC 0.5.1, a prerequisite for some older software on OS/2.

Installation Directory: FindBootDrive() || ':\os2\dll'

This command installs MMIOMP3 by Russell O'Connor.

It is safe to take all the defaults suggested by the installer.

A reboot is required after the installation is complete.

Procedure
The IBM Multimedia Presentation Manager/2 window is open.
Press Install
Allow it to change Config.Sys
Press OK to dismiss the dialog.

Installation Directory: FindBootDrive() || ':\mmos2'
r6.ca

This command installs Netscape 4.61 and the improved icons.

The install of Netscape is unattended. After the installation completes, a reboot is needed.

Procedure
Netscape will install automatically.

Installation Directory: appsDir || '\Netscape'

This command installs NewView, an enhanced help viewer. NewView was created by Aaron Lawrence, and is now maintained by Ronald Brill. Alex Taylor contributed this version.

Installation Directory:
trac.netlabs.org

This command installs NoScript into Mozilla, Firefox, PmW-Fx, SeaMonkey and SeaMonkey2 web browsers. The NoScript Firefox extension provides extra protection for Firefox, Seamonkey and other mozilla-based browsers: this free, open source add-on allows JavaScript, Java, Flash and other plugins to be executed only by trusted web sites of your choice (e.g. your online bank).

Installation Directory:
noscript.net

This command installs Odin. Odin provides support for Win32 programs under OS/2 and eComStation. The installation is automated using WarpIN.

The Odin version is 0.8.9

Installation Directory: appsDir || '\Odin'
odin.netlabs.org

This command installs oo, a command line utility to manipulate Workplace Shell Objects, to the utilities directory. oo is written by Rich Walsh.

Installation Directory: cdglobal('utilDir')

This command updates the Suntan Special phone home userid, password and URL. This information is used to download additional applications for Suntan Special.

Installation Directory:

This command pauses for some time (default: 60 seconds). Also signals sequence page progress bar.

Installation Directory:

This command sets the computer to ignore errors while config.sys is processed. An argument of "NO" will cause the computer to continue booting without pausing, while any other entry will cause the computer to pause on errors while the config.sys is processed.

Installation Directory:

This command installs the Plug-in Pack version 3.0, which normally accompanies Netscape 4.61.

The install is unattended.

Installation Directory: appsDir || '\Mozilla'

This command reboots the computer. If the turbo mode is 0, message is displayed before rebooting. Both IBM boot manager and AiR-Boot are supported.

Installation Directory:

This command customizes the Recovery Choices menu with the hostname and boot drive letter.

Installation Directory:

This command creates an icon for the OS/2 registry editor.

The install is unattended. The command creates a program object.

Installation Directory:

This command installs the resolv2 file, which provide name resolution for TCP/IP. The resolv2 file is copied from the location specified by the setting 'resolvFile'

The install is unattended.

Installation Directory:

This command restores the boot manager options saved by the Save Boot Manager command.

Installation Directory:

This command ensures that unicode.sys is included in config.sys.

Installation Directory:

This command installs RSJ CD-Writer 6.03

The installation is unattended, but the installer shows up on the screen. If user-supplied registration keys are not accepted by the installer, the installation will prompt for user name. When the installer completes, config.sys will be changed to permit the system to see the CD-RW as a normal CD-Rom. The buffer sizes are increased to 64K to handle modern DVD Writers.

A reboot is required after the installation is complete.

Installation Directory: appsDir || '\CDWriter'
www.rsj.de

This command saves Boot Manager settings, then programs boot manager to always boot the current partition. RestoreBootManager undoes the changes.

SaveBootManager is useful when running a process such as FixPak 15 which reboots the machine twice. The reboot command is guaranteed to start the current partition only once.

Installation Directory:

This command scans a sequence for extra files and displays a message. Sequences invoked by the selected sequence are not scanned.

Installation Directory:

Automatically set my custom sounds, all 44.1 KHz to work with USB Audio Driver (Make your own default sounds file based on this one)

Installation Directory:

This command runs the Setup Directory Editor. The Setup Directory Editor displays all of the applications in the setup directory. Each application may be selected by the user for deletion.

Installation Directory:

This command opens the Volume applet.

Installation Directory:

This command installs Suntan Special version 0.68.

Installation Directory: appsDir || '\Suntan'
www.blondeguy.com

System tray widget for XCenter, version 0.3

This command installs the System tray widget for XCenter. After installation, user can create system tray widget on eCenter or xCenter manually.

Installation Directory:
www.eros2.info

This command installs TCP/IP version 4.32. Supported systems include Warp 4 and Warp Server for e-Business. The installation is unattended.

TCP/IP 4.32 can be downloaded from Software Choice or www.ecomstation.com

A reboot is required after installing TCP/IP 4.32.

The files for the IBM TCP/IP 4.3 are not supplied on the Suntan Special CD-ROM. You must supply this item: tcpip43_eng.zip

Installation Directory:

This command cleans up after the installation of IBM TCP/IP version 4.32.

TCP/IP 4.3 can be downloaded from Software Choice or www.ecomstation.com

A reboot is required after this command.

Installation Directory:

This command opens the TCP/IP configuration for TCP/IP version 4.1 and up found in Warp Server for e-business, MCP, ACP and eComStation.

Procedure
create TCP/IP users and/or edit their settings
activate FTP and telnetd servers.
This is also the place to configure TCP/IP printing.
Press OK to close the configuration program.
Press OK to save settings.
Press Cancel to reboot later.

Installation Directory:

This command installs the TCP/IP password file from the location specified by the setting 'passwdFile'. The default name of the TCP/IP password file is TCPNBK.NBK

The install is unattended.

Installation Directory:

This command installs top V2.14, an OS/2 VIO application to monitor CPU usage by process. It does NOT impose an artificial load on the system to generate usage statistics. The process list can be sorted according to various criteria (including CPU percentage, name, threads), and any process from the list can be selected to be killed.

CADH, a program that handles ctrl-alt-del is also installed.

The install is unattended. The command creates a program object. Config.sys is updated to load the CADH device driver. The CAD Popup is added to the Startup Folder.

Installation Directory: appsDir || '\top'
home.clara.net

This command updates the timezone code for Innotek Java 1.4.2 to reflect 2007 changes to Daylight Saving Time.

Installation Directory:
www.ecomstation.com

This command installs InfoZip Unzip version 6.00 compiled by Paul Smedley. The Unzip executables are replaced in each place that they occur in the path. The Unzip documentation, if found, is replaced in the eCS directories.

Installation Directory: appsDir || '\InfoZip'
os2ports.smedley.id.au

This command applies the November 18, 1999 - TCP/IP FixPak UN_0980. This FixPak applies to Warp 4 and Warp Server.

TCP/IP FixPak UN_0980 is applied using an unattended install method. A reboot is required after applying the FixPak.

Installation Directory:

This command applies TCP/IP 4.3 for OS/2 FixPak un_2334. This FixPak applies to TCP/IP 4.3x.

TCP/IP 4.3 for OS/2 FixPak un_2334 is applied using an unattended install method. A reboot is required after applying this FixPak.

Installation Directory:

This command installs USB Basic support.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

The files for the USB Basic driver are not supplied on the Suntan Special CD-ROM. You must supply this item: usb10162.zip

Installation Directory: FindBootDrive() || ':\os2\boot'

This command installs USB Storage support.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

The files for the USB Storage driver are not supplied on the Suntan Special CD-ROM. You must supply this item: usbs10162.zip

Installation Directory: FindBootDrive() || ':\os2\boot'

This command installs USB Printer support.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

The files for the USB Printer driver are not supplied on the Suntan Special CD-ROM. You must supply this item: usbp10157.zip

Installation Directory: bootDrive || ':\os2\boot'

This command installs the USB Resource Manager, which is a utility from the great folks at OS/2 NetLabs.

This install is unattended, and requires usbcalls to be installed.

Installation Directory: appsDir || '\USBResMgr'

This command installs Blonde Guy utilities. The copies of zip and unzip are old, staticly linked programs that run under Warp 4 GA.

If the utility directory is not already in the LIBPATH, the Config.Sys is modified. Directories listed in LIBPATH are cleared of unwanted copies of unzip32.dll. if wget.cmd is found, it is renamed to wget2.cmd.

A reboot may be needed after the installation completes.

Installation Directory:

This command installs VPC Additions. It is intended to be installed on an OS/2 system inside Microsoft Virtual PC. A reboot is needed after installing. Use these additions instead of the newer Microsoft version if you use shared folders.

Installation Directory: FindBootDrive() || ':'

This command applies the August 11, 2005 - Kernel patch. This patch applies to Warp 4, MCP and eComStation.

The Kernel patch is applied using an unattended install method. A reboot is required after applying this patch.

Installation Directory: FindBootDrive() || ":\"

This command modifies the Warp4 Config.Sys with my favorite changes. Seventeen lines are changed in all.

Ensure TEMP is defined and exists Set Time Zone (TZ=) ReserveDriveLetter

A reboot is needed because Config.Sys is changed.

Installation Directory: FindBootDrive() || ':\'

This command opens the TCP/IP configuration for TCP/IP version 4.0 found in Warp 4.

Installation Directory:

This command installs WarpIN version 1.0.22. WarpIN is the new OS/2 installer originally written by Ulrich Moeller and now maintained by Paul Ratcliffe.

The initial installation of WarpIN is interactive, but upgrades are to existing WarpIN installations are unattended.

Installation Directory: appsDir || '\WarpIN'
warpin.netlabs.org

This command removed the Welcome program, which is the whirling animation that appears when Warp is first installed. This command is unattended.

Installation Directory:

This command opens the System properties. If XWorkplace or eWorkplace is installed, it opens the Screen properties.

Installation Directory:

This command opens the WarpCenter properties. I like to change the icons to Large, and turn off all monitors except the CPU monitor.

Installation Directory:

This command applies IBM MPTS Lan Adapter and Protocol Support FixPak wr_8423. This FixPak applies to Warp 3 Connect, Warp 4 and Warp Server.

IBM MPTS Lan Adapter and Protocol Support FixPak wr_8423 installs a new version of MPTS. It is safe to take all the default settings for this installation.

A reboot is required after applying this FixPak.

Installation Directory:

This command applies IBM MPTS Lan Adapter and Protocol Support FixPak wr_8425. This FixPak applies to Warp 3 Connect, Warp 4 and Warp Server.

FixPak WR_8423 is a prerequisite for this FixPak.

IBM MPTS Lan Adapter and Protocol Support FixPak wr_8425 is applied using an unattended install method. A reboot is required after applying this FixPak.

Installation Directory:

This command applies IBM MPTS FixPak wr_8708. This FixPak applies to TCP/IP 4.3x.

IBM MPTS Lan Adapter and Protocol Support FixPak wr_8708 is applied using an unattended install method. A reboot is required after applying this FixPak.

Installation Directory:

This command applies the July 21, 2000 - Warp 3 FixPak XR_D002, known as Device Driver Fixpak 2. This FixPak applies to Warp 3, Warp 4 and Warp Server for e-Business.

Device Driver FixPak 2 is applied using an unattended install method. A reboot is required after applying the FixPak.

Installation Directory:

This command applies the December 4, 2000 - Warp 4 FixPak XR_M015, known as OS/2 Warp 4 FixPak 15. This FixPak applies to OS/2 Warp 4.

OS/2 Warp 4 FixPak 15 is applied using an unattended install method. A reboot is required after applying the FixPak.

Installation Directory:

This command installs X-Workplace 1.0.12, a workplace shell extender written by Ulrich Moeller and maintained by Paul Ratcliffe and Rich Walsh.

Installation Directory: appsDir || '\XWorkplace'
trac.netlabs.org

This command configures XWorkplace.

Installation Directory:

This command installs Arca Noae Package Manager version 1.04

Branding Details: branding.bmp - logo file (about 90 x 100 pixels) yubrnden.msg - compiled message file containing text for the about box yubrnden.txt - source for message file containing text for the about box

Installation Directory: appsDir || '\anpm'
www.arcanoae.com

Yum utility runs a yum command to give Suntan Special sequences full access to the facilities of RPM/YUM for OS/2.

Useful commands: update

Installation Directory:
svn.netlabs.org

This command installs InfoZip Zip version 3.0-8 by bitwise. The Zip executables are replaced in each place that they occur in the path. The Zip documentation, if found, is replaced in the eCS directories. Finally, yum is called to update zip.

Installation Directory: appsDir || '\InfoZip'
os2ports.smedley.id.au